Akbarpour, M. R., Salahi, E., Alikhani Hesari, F., Simchi, A., & Kim, H. S. (2014). Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling. Ceramics International, 40(1 PART A), 951-960. doi: 10.1016/j.ceramint.2013.06.091


Akhavan, O., Bijanzad, K., & Mirsepah, A. (2014). Synthesis of graphene from natural and industrial carbonaceous wastes. RSC Advances, 4(39), 20441-20448. doi: 10.1039/c4ra01550a


Akhavan, O., & Ghaderi, E. (2014). The use of graphene in the self-organized differentiation of human neural stem cells into neurons under pulsed laser stimulation. Journal of Materials Chemistry B, 2(34), 5602-5611. doi: 10.1039/c4tb00668b


Akhavan, O., Ghaderi, E., Abouei, E., Hatamie, S., & Ghasemi, E. (2014). Accelerated differentiation of neural stem cells into neurons on ginseng-reduced graphene oxide sheets. Carbon, 66, 395-406. doi: 10.1016/j.carbon.2013.09.015


Akhavan, O., Ghaderi, E., Hashemi, E., & Rahighi, R. (2014). Ultra-sensitive detection of leukemia by graphene. Nanoscale, 6(24), 14810-14819. doi: 10.1039/c4nr04589k


Akhavan, O., Ghaderi, E., Rahighi, R., & Abdolahad, M. (2014). Spongy graphene electrode in electrochemical detection of leukemia at single-cell levels. Carbon, 79(1), 654-663. doi: 10.1016/j.carbon.2014.08.058


Akhavan, O., Meidanchi, A., Ghaderi, E., & Khoei, S. (2014). Zinc ferrite spinel-graphene in magneto-photothermal therapy of cancer. Journal of Materials Chemistry B, 2(21), 3306-3314. doi: 10.1039/c3tb21834a


Alehdaghi, H., Marandi, M., Molaei, M., Irajizad, A., & Taghavinia, N. (2014). Facile synthesis of gradient alloyed ZnxCd1- xS nanocrystals using a microwave-assisted method. Journal of Alloys and Compounds, 586, 380-384. doi: 10.1016/j.jallcom.2013.09.190


Alimirsalari, S., Tajabadi, F., Salehkoutahi, S. M., Ghahary, R., & Taghavinia, N. (2014). Nanosheet arrays of TiO2synthesized by one step conversion of ZnO nanosheets: Boosting of electron transport rate and application in dye solar cells. RSC Advances, 4(85), 45174-45179. doi: 10.1039/c4ra07439d


Alizadeh, A., & Parsafar, G. (2014). Temperature dependence and the effect of charge configuration on water permeation through modified carbon nanotubes: A simulation study. Fluid Phase Equilibria, 363, 282-289. doi: 10.1016/j.fluid.2013.12.005


Asadian, E., Shahrokhian, S., Zad, A. I., & Jokar, E. (2014). In-situ electro-polymerization of graphene nanoribbon/polyaniline composite film: Application to sensitive electrochemical detection of dobutamine. Sensors and Actuators, B: Chemical, 196, 582-88. doi: 10.1016/j.snb.2014.02.049


Bavi, N., Nakayama, Y., Bavi, O., Cox, C. D., Qin, Q. H., & Martinac, B. (2014). Biophysical implications of lipid bilayer rheometry for mechanosensitive channels. Proceedings of the National Academy of Sciences of the United States of America, 111(38), 13864-13869. doi: 10.1073/pnas.1409011111


Bavi, O., Vossoughi, M., Naghdabadi, R., & Jamali, Y. (2014). The effect of local bending on gating of MscL using a representative volume element and finite element simulation. Channels, 8(4), 344-349. doi: 10.4161/chan.29572


Bayat, A., Ebrahimi, M., & Moshfegh, A. Z. (2014). Correlation between surface roughness and hydrophobicity of GLAD RF sputtered PTFE/W/Glass nanorod thin films. Vacuum, 101, 279-282. doi: 10.1016/j.vacuum.2013.09.007


Behrouznejad, F., & Taghavinia, N. (2014). High-performance/low-temperature-processed dye solar cell counter electrodes based on chromium substrates with cube-like morphology. Journal of Power Sources, 260, 299-306. doi: 10.1016/j.jpowsour.2014.02.074


Bigdeli, A., Hormozi-Nezhad, M. R., Jalali-Heravi, M., Abedini, M. R., & Sharif-Bakhtiar, F. (2014). Towards defining new nano-descriptors: Extracting morphological features from transmission electron microscopy images. RSC Advances, 4(104), 60135-60143. doi: 10.1039/c4ra10375k


Boroumandnia, A., Kasaeian, A. B., Nikfarjam, A. R., & Mohammadpour, R. (2014). Effect of TiO2 nanofiber density on organic-inorganic based hybrid solar cells. International Journal of Engineering, Transactions A: Basics, 27(7), 1133-1138. doi: 10.5829/idosi.ije.2014.27.07a.15


Darbandi, M., Ghafourizadeh, M., & Schneider, G. E. (2014). Extending a numerical procedure to simulate the micro/nanoscale soot formation in ethylene-air turbulent flame using acetylene-route nucleation. Paper presented at the AIAA AVIATION 2014 -11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference.


Ebrahimi, M., Qorbani, M., Bayat, A., Zavarian, A. A., & Moshfegh, A. Z. (2014). Correlation between surface stochastic parameters and field emission property of NiO nanorods. Journal of Physics D: Applied Physics, 47(11). doi: 10.1088/0022-3727/47/11/115302


Ehtesabi, H., Ahadian, M. M., Taghikhani, V., & Ghazanfari, M. H. (2014). Enhanced heavy oil recovery in sandstone cores using TiO2 nanofluids. Energy and Fuels, 28(1), 423-430. doi: 10.1021/ef401338c


Enzevaee, C., Gutkin, M. Y., & Shodja, H. M. (2014). Surface/interface effects on the formation of misfit dislocation in a core-shell nanowire. Philosophical Magazine, 94(5), 492-519. doi: 10.1080/14786435.2013.856527


Esfandiar, A., Irajizad, A., Akhavan, O., Ghasemi, S., & Gholami, M. R. (2014). Pd-WO3/reduced graphene oxide hierarchical nanostructures as efficient hydrogen gas sensors. International Journal of Hydrogen Energy, 39(15), 8169-8179. doi: 10.1016/j.ijhydene.2014.03.117


Esfandiari, N., Simchi, A., & Bagheri, R. (2014). Size tuning of Ag-decorated TiO2 nanotube arrays for improved bactericidal capacity of orthopedic implants. Journal of Biomedical Materials Research - Part A, 102(8), 2625-2635. doi: 10.1002/jbm.a.34934


Fardindoost, S., Mohammadi, S., Zad, A. I., Sarvari, R., & Shariatpanahi, S. P. (2014). Electromechanical resonators based on electrospun ZnO nanofibers. Journal of Micro/ Nanolithography, MEMS, and MOEMS, 13(4). doi: 10.1117/1.JMM.13.4.043011


Farvizi, M., Ebadzadeh, T., Vaezi, M. R., Yoon, E. Y., Kim, Y. J., Kim, H. S., & Simchi, A. (2014). Microstructural characterization of HIP consolidated NiTi-nano Al 2O3 composites. Journal of Alloys and Compounds, 606, 21-26. doi: 10.1016/j.jallcom.2014.03.184


Fazaeli, Y., Akhavan, O., Rahighi, R., Aboudzadeh, M. R., Karimi, E., & Afarideh, H. (2014). In vivo SPECT imaging of tumors by 198,199Au-labeled graphene oxide nanostructures. Materials Science and Engineering C, 45, 196-204. doi: 10.1016/j.msec.2014.09.019


Firouz-Abadi, R. D., Mohammadkhani, H., & Amini, H. (2014). Vibration analysis of a graphene nanoribbon under harmonic lorentz force using a hybrid modal-molecular dynamics method. International Journal of Structural Stability and Dynamics, 14(2). doi: 10.1142/S0219455413500570


Ghadim, E. E., Rashidi, N., Kimiagar, S., Akhavan, O., Manouchehri, F., & Ghaderi, E. (2014). Pulsed laser irradiation for environment friendly reduction of graphene oxide suspensions. Applied Surface Science, 301, 183-188. doi: 10.1016/j.apsusc.2014.02.036


Ghazyani, N., Majles Ara, M. H., Tajabadi, F., Dabirian, A., Mohammadpour, R., & Taghavinia, N. (2014). Dielectric core-shells with enhanced scattering efficiency as back-reflectors in dye sensitized solar cells. RSC Advances, 4(7), 3621-3626. doi: 10.1039/c3ra44079f


Gholami, M., Qorbani, M., Moradlou, O., Naseri, N., & Moshfegh, A. Z. (2014). Optimal Ag2S nanoparticle incorporated TiO2 nanotube array for visible water splitting. RSC Advances, 4(15), 7838-7844. doi: 10.1039/c3ra44898c


Golshani, M., Weimann, S., Jafari, K., Nezhad, M. K., Langari, A., Bahrampour, A. R., . . . Szameit, A. (2014). Impact of loss on the wave dynamics in photonic waveguide lattices. Physical Review Letters, 113(12). doi: 10.1103/PhysRevLett.113.123903


Goudarzi, M., & Ghorbani, M. (2014) The effect of layer number on the nanostructural ternary mixed oxide containing Ti, Ru and Ir on titanium. Vol. 829. Advanced Materials Research (pp. 638-642).


Hakim, M., Abedini Najafabadi, H., Pazuki, G., & Vossoughi, M. (2014). Novel approach for liquid-liquid phase equilibrium of biodiesel (canola and sunflower) + glycerol + methanol. Industrial and Engineering Chemistry Research, 53(2), 855-864. doi: 10.1021/ie4031902


Hashemi, E., Akhavan, O., Shamsara, M., Rahighi, R., Esfandiar, A., & Tayefeh, A. R. (2014). Cyto and genotoxicities of graphene oxide and reduced graphene oxide sheets on spermatozoa. RSC Advances, 4(52), 27213-27223. doi: 10.1039/c4ra01047g


Hashemi, E., Akhavan, O., Shamsara, M., Valimehr, S., & Rahighi, R. (2014). DNA and RNA extractions from eukaryotic and prokaryotic cells by graphene nanoplatelets. RSC Advances, 4(105), 60720-60728. doi: 10.1039/c4ra11458b


Hormozi-Nezhad, M. R., & Abbasi-Moayed, S. (2014). A sensitive and selective colorimetric method for detection of copper ions based on anti-aggregation of unmodified gold nanoparticles. Talanta, 129, 227-232. doi: 10.1016/j.talanta.2014.05.022


Hormozi-Nezhad, M. R., Azargun, M., & Fahimi-Kashani, N. (2014). A colorimetric assay for d-Penicillamine in urine and plasma samples based on the aggregation of gold nanoparticles. Journal of the Iranian Chemical Society, 11(5), 1249-1255. doi: 10.1007/s13738-013-0393-3


Hosseini, Z., Diau, E. W. G., Mehrany, K., & Taghavinia, N. (2014). Assessment of luminescent downshifting layers for the improvement of light-harvesting efficiency in dye-sensitized solar cells. ChemPhysChem, 15(17), 3791-3799. doi: 10.1002/cphc.201402505


Hosseini, Z. S., Mortezaali, A., & Iraji Zad, A. (2014). Comparative study of the grown ZnO nanostructures on quartz and alumina substrates by vapor phase transport method without catalyst: Synthesis and acetone sensing properties. Sensors and Actuators, A: Physical, 212, 80-86. doi: 10.1016/j.sna.2014.03.007


Jamali, M., Khalili, S., Bagheri, R., & Simchi, A. (2014). Study the effect of architectural modification on fracture behavior of Al-DRA composite. Mechanics of Advanced Materials and Structures, 21(8), 662-668. doi: 10.1080/15376494.2012.707295


Janfaza, S., Molaeirad, A., Mohamadpour, R., Khayati, M., & Mehrvand, J. (2014). Efficient Bio-Nano Hybrid Solar Cells via Purple Membrane as Sensitizer. BioNanoScience, 4(1), 71-77. doi: 10.1007/s12668-013-0118-1


Jokar, E., Shahrokhian, S., & Zad, A. I. (2014). Electrochemical functionalization of graphene nanosheets with catechol derivatives as an effective method for preparation of highly performance supercapacitors. Electrochimica Acta, 147, 136-142. doi: 10.1016/j.electacta.2014.09.102


Jokar, E., zad, A. I., & Shahrokhian, S. (2014). Synthesis and characterization of NiCo2O4 nanorods for preparation of supercapacitor electrodes. Journal of Solid State Electrochemistry, 19(1), 269-274. doi: 10.1007/s10008-014-2592-y


Kamali, M. T., & Shodja, H. M. (2014). An accurate semi-analytical method for an arbitrarily oriented edge or interior crack in an anisotropic homogeneous elastic solid. European Journal of Mechanics, A/Solids, 45, 133-142. doi: 10.1016/j.euromechsol.2013.11.011


Kamalzadeh, Z., & Shahrokhian, S. (2014). Electrochemical determination of atorvastatin on nano-scaled polypyrrole film. Bioelectrochemistry, 98, 1-10. doi: 10.1016/j.bioelechem.2014.01.007


Khederlou, K., Bagheri, R., & Shojaei, A. (2014). A mathematical method for XRD pattern interpretation in clay containing nano composites. Applied Surface Science, 318, 90-94. doi: 10.1016/j.apsusc.2014.01.044


Khodabakhshi, F., Gerlich, A. P., Simchi, A., & Kokabi, A. H. (2014). Cryogenic friction-stir processing of ultrafine-grained Al-Mg-TiO2 nanocomposites. Materials Science and Engineering A, 620, 471-482. doi: 10.1016/j.msea.2014.10.048


Khodabakhshi, F., Simchi, A., Kokabi, A., Nosko, M., & Švec, P. (2014). Strain rate sensitivity, work hardening, and fracture behavior of an Al-Mg TiO2 nanocomposite prepared by friction stir processing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45(9), 4073-4088. doi: 10.1007/s11661-014-2330-1


Khodabakhshi, F., Simchi, A., Kokabi, A. H., Nosko, M., Simanĉik, F., & Švec, P. (2014). Microstructure and texture development during friction stir processing of Al-Mg alloy sheets with TiO2 nanoparticles. Materials Science and Engineering A, 605, 108-118. doi: 10.1016/j.msea.2014.03.008


Kiani, M. A., Khani, H., & Mohammadi, N. (2014). MnO2/ordered mesoporous carbon nanocomposite for electrochemical supercapacitor. Journal of Solid State Electrochemistry, 18(4), 1117-1125. doi: 10.1007/s10008-013-2367-x


Mansouri, M., Simchi, A., Lee, J. I., Park, E. S., & Varahram, N. (2014). Non-isothermal kinetic studies of crystallization in amorphous Al 86Ni10MM4 alloy. Journal of Non-Crystalline Solids, 387, 36-40. doi: 10.1016/j.jnoncrysol.2013.12.027


Mansouri, M., Simchi, A., Varahram, N., & Park, E. S. (2014). Development of fcc-Al nanoparticles during crystallization of amorphous Al-Ni alloys containing mischmetal: Microstructure and hardness evaluation. Materials Science and Engineering A, 604, 92-97. doi: 10.1016/j.msea.2014.03.012


Mazaheri, M., Akhavan, O., & Simchi, A. (2014). Flexible bactericidal graphene oxide-chitosan layers for stem cell proliferation. Applied Surface Science, 301, 456-462. doi: 10.1016/j.apsusc.2014.02.099


Mbeh, D. A., Akhavan, O., Javanbakht, T., Mahmoudi, M., & Yahia, L. (2014). Cytotoxicity of protein corona-graphene oxide nanoribbons on human epithelial cells. Applied Surface Science, 320, 596-601. doi: 10.1016/j.apsusc.2014.09.155


Meidanchi, A., & Akhavan, O. (2014). Superparamagnetic zinc ferrite spinel-graphene nanostructures for fast wastewater purification. Carbon, 69, 230-238. doi: 10.1016/j.carbon.2013.12.019


Mohammadpour, R., Ahmadvand, H., & Iraji Zad, A. (2014). A novel field ionization gas sensor based on self-organized CuO nanowire arrays. Sensors and Actuators, A: Physical, 216, 202-206. doi: 10.1016/j.sna.2014.04.038


Mohammadpour, R., Janfaza, S., & Abbaspour-Aghdam, F. (2014). Light harvesting and photocurrent generation by nanostructured photoelectrodes sensitized with a photosynthetic pigment: A new application for microalgae. Bioresource Technology, 163, 1-

5. doi: 10.1016/j.biortech.2014.04.003


Namakian, R., Shodja, H. M., & Mashayekhi, M. (2014). Fully enriched weight functions in mesh-free methods for the analysis of linear elastic fracture mechanics problems. Engineering Analysis with Boundary Elements, 43, 1-8. doi: 10.1016/j.enganabound.2014.02.006


Nikfarjam, A., Mohammadpour, R., & Iraji Zad, A. (2014). Fabrication of gas ionization sensor based on titanium oxide nanotube arrays. Applied Physics A: Materials Science and Processing, 115(4), 1387-1393. doi: 10.1007/s00339-013-8017-4


Nourmohammadi, A., Rahighi, R., Akhavan, O., & Moshfegh, A. (2014). Graphene oxide sheets involved in vertically aligned zinc oxide nanowires for visible light photoinactivation of bacteria. Journal of Alloys and Compounds, 612, 380-385. doi: 10.1016/j.jallcom.2014.05.195


Ordikhani, F., & Simchi, A. (2014). Long-term antibiotic delivery by chitosan-based composite coatings with bone regenerative potential. Applied Surface Science, 317, 56-66. doi: 10.1016/j.apsusc.2014.07.197


Ordikhani, F., Tamjid, E., & Simchi, A. (2014). Characterization and antibacterial performance of electrodeposited chitosan-vancomycin composite coatings for prevention of implant-associated infections. Materials Science and Engineering C, 41, 240-248. doi: 10.1016/j.msec.2014.04.036


Ozmaian, M., Baghani, M., & Naghdabadi, R. (2014). Electro-mechanical bending analysis of ionic polymer metal nanocomposites (IPMNCs). Mechanics Research Communications, 62, 77-82. doi: 10.1016/j.mechrescom.2014.09.002


Parand, P., Samadpour, M., Esfandiar, A., & Iraji Zad, A. (2014). Graphene/PbS as a Novel Counter Electrode for Quantum Dot Sensitized Solar Cells. ACS Photonics, 1(4), 323-330. doi: 10.1021/ph400011z


Poorasadion, S., Arghavani, J., Naghdabadi, R., & Sohrabpour, S. (2014). An improvement on the Brinson model for shape memory alloys with application to two-dimensional beam element. Journal of Intelligent Material Systems and Structures, 25(15), 1905-1920. doi: 10.1177/1045389X13512187


Rabbani, F., Abdollahi, H., & Hormozi-Nezhad, M. R. (2014). A second-order advantage achieved with the aid of gold nanoparticle catalytic activity. Determination of nitrophenol isomers in binary mixtures. Analytical Methods, 6(9), 3056-3064. doi: 10.1039/c3ay42307g


Rezazadeh Kalehbasti, S., Gutkin, M. Y., & Shodja, H. M. (2014). Wedge disclinations in the shell of a core-shell nanowire within the surface/interface elasticity. Mechanics of Materials, 68, 45-63. doi: 10.1016/j.mechmat.2013.08.003


Sajjadnejad, M., Ghorbani, M., & Afshar, A. (2014). Microstructure-corrosion resistance relationship of Direct and Pulse Current electrodeposited Zn-TiO2 nanocomposite coatings. Ceramics International, 41(1), 217-224. doi: 10.1016/j.ceramint.2014.08.061


Salari, H., Robatjazi, H., Hormozi-Nezhad, M. R., Padervand, M., & Gholami, M. R. (2014). Colloidal gold nanoparticles: An unexpected catalytic activity in aqueous phase with dioxygen. Catalysis Letters, 144(7), 1219-1222. doi: 10.1007/s10562-014-1255-z


Samadi, M., Pourjavadi, A., & Moshfegh, A. Z. (2014). Role of CdO addition on the growth and photocatalytic activity of electrospun ZnO nanofibers: UV vs. visible light. Applied Surface Science, 298, 147-154. doi: 10.1016/j.apsusc.2014.01.146


Samadpour, M., Zad, A. I., & Molaei, M. (2014). Simply synthesized TiO2 nanorods as an effective scattering layer for quantum dot sensitized solar cells. Chinese Physics B, 23(4). doi: 10.1088/1674-1056/23/4/047302


Sasanpour, P., & Mohammadpour, R. (2014). Theoretical calculation of scattering efficiency of isotropic and anisotropic scattering particles employed in nanostructured solar cells. Journal of Optics (United Kingdom), 16(5). doi: 10.1088/2040-8978/16/5/055703


Shahrokhian, S., Balotf, H., & Ghalkhani, M. (2014). Nano composite coating based on cellulose nanofibers/carbon nanoparticles: application to voltammetric determination of clonazepam. Journal of Solid State Electrochemistry, 19(1), 251-260. doi: 10.1007/s10008-014-2597-6


Sharifi, N., Tajabadi, F., & Taghavinia, N. (2014). Recent developments in dye-sensitized solar cells. ChemPhysChem, 15(18), 3902-3927. doi: 10.1002/cphc.201402299


Shidpour, R., Vosoughi, M., Simchi, A., & Ghanbari, F. (2014). Effect of morphology-based defect structure of ZnO nanostructures in photo-degradation of organic dye. Paper presented at the Materials Research Society Symposium Proceedings.


Shidpour, R., Vossoughi, M., & Simchi, A. R. (2014). The effect of oxygen defects on activity of Au/ZnO catalyst in low temperature oxidation of benzyl alcohol. Paper presented at the Materials Research Society Symposium Proceedings.


Shidpour, R., Vossoughi, M., Simchi, A. R., & Micklich, M. (2014). Extended quantum yield: A dimensionless factor including characteristics of light source, photocatalyst surface, and reaction kinetics in photocatalytic systems. Industrial and Engineering Chemistry Research, 53(30), 11973-11978. doi: 10.1021/ie5021987


Shivaee, H. A., Samadi, M., Alihosseini, H., & Madaah Hosseini, H. R. (2014). Nanocrystallization kinetics and magnetic properties of the melt spun amorphous (Fe0.5Co0.5)77Si11B 9Cu0.6Nb2.4 alloy. Thermochimica Acta, 575, 64-69. doi: 10.1016/j.tca.2013.10.022


Shodja, H. M., Jarfi, H., & Rashidinejad, E. (2014). The electro-elastic scattered fields of an SH-wave by an eccentric two-phase circular piezoelectric sensor in an unbounded piezoelectric medium. Mechanics of Materials, 75, 1-12. doi: 10.1016/j.mechmat.2014.03.013


Shodja, H. M., & Khorshidi, A. (2014). Comment on "annular inhomogeneities with eigenstrain and interphase modeling" [2014, J. Mech. Phys. Solids 64, 468-482]. Journal of the Mechanics and Physics of Solids, 73, 1-2. doi: 10.1016/j.jmps.2014.07.008


Shodja, H. M., Tabatabaei, M., & Esfarjani, K. (2014). First principles molecular dynamics studies of elastic constants, ideal tensile strength, chemistry of crack initiation, and surface and cohesive energies in amorphous silicon. Philosophical Magazine, 94(25), 2913-2936. doi: 10.1080/14786435.2014.939735


Tabesh, H., Amoabediny, G., Rasouli, A., Ramedani, A., Poorkhalil, A., Kashefi, A., & Mottaghy, K. (2014). Simulation of blood oxygenation in capillary membrane oxygenators using modified sulfite solution. Biophysical Chemistry, 195, 8-15. doi: 10.1016/j.bpc.2014.07.005


Vossoughi, M., Ghanbari, F., Simchi, A., & Shidpour, R. (2014). Photo-degradation of organic dye by zinc oxide nanosystems with special defect structure: Effect of the morphology and annealing temperature. Applied Catalysis A: General, 472, 198-204. doi: 10.1016/j.apcata.2013.12.003


Yousefzadeh, S., Faraji, M., Nien, Y. T., & Moshfegh, A. Z. (2014). CdS nanoparticle sensitized titanium dioxide decorated graphene for enhancing visible light induced photoanode. Applied Surface Science, 320, 772-779. doi: 10.1016/j.apsusc.2014.09.167


Zarghami, V., & Ghorbani, M. (2014). Alteration of corrosion and nanomechanical properties of pulse electrodeposited Ni/SiC nanocomposite coatings. Journal of Alloys and Compounds, 598, 236-242. doi: 10.1016/j.jallcom.2014.01.220


Zarrabi, A., Shokrgozar, M. A., Vossoughi, M., & Farokhi, M. (2014). In vitro biocompatibility evaluations of hyperbranched polyglycerol hybrid nanostructure as a candidate for nanomedicine applications. Journal of Materials Science: Materials in Medicine, 25(2), 499-506. doi: 10.1007/s10856-013-5094-z


Zirak, M., Akhavan, O., Moradlou, O., Nien, Y. T., & Moshfegh, A. Z. (2014). Vertically aligned ZnO@CdS nanorod heterostructures for visible light photoinactivation of bacteria. Journal of Alloys and Compounds, 590, 507-513. doi: 10.1016/j.jallcom.2013.12.158

تماس با ما

شماره تلفن های پژوهشکده:

دفتر: 66164123

فکس: 66164119

معاونت: 66164120

دفتر هیآت علمی: 66164124 

دفتر پژوهشگران پسادکتری: 66164124

دبیرخانه کنفرانس نانوساختارها: 66164118

سایت، دفتر دانشجویان دکتری

و آزمایشگاه نانو محاسباتی: 66164121

مجموعه آزمایشگاه های پژوهشکده: 66164125