Ahmadpour-Yazdi, H., Hormozi-Nezhad, M. R., Abadi, A. R., Sanati, M. H., & Kazemi, B. (2015). Colourimetric-based method for the diagnosis of spinal muscular atrophy using gold nanoprobes. IET Nanobiotechnology, 9(1), 5-10. doi: 10.1049/iet-nbt.2013.0065

Akhavan, O. (2015). Bacteriorhodopsin as a superior substitute for hydrazine in chemical reduction of single-layer graphene oxide sheets. Carbon, 81(1), 158-166. doi: 10.1016/j.carbon.2014.09.044


Akhavan, O., Ghaderi, E., & Shirazian, S. A. (2015). Near infrared laser stimulation of human neural stem cells into neurons on graphene nanomesh semiconductors. Colloids and Surfaces B: Biointerfaces, 126, 313-321. doi: 10.1016/j.colsurfb.2014.12.027

Alehdaghi, H., Marandi, M., Irajizad, A., & Taghavinia, N. (2015). Influence of cathode roughness on the performance of F8BT based organic-inorganic light emitting diodes. Organic Electronics: physics, materials, applications, 16, 87-94. doi: 10.1016/j.orgel.2014.10.038

Bayat, A., Ebrahimi, M., Nourmohammadi, A., & Moshfegh, A. Z. (2015). Wettability properties of PTFE/ZnO nanorods thin film exhibiting UV-resilient superhydrophobicity. Applied Surface Science, 341, 92-99. doi: 10.1016/j.apsusc.2015.02.197

Bigdeli, A., Hormozi-Nezhad, M. R., & Parastar, H. (2015). Using nano-QSAR to determine the most responsible factor(s) in gold nanoparticle exocytosis. RSC Advances, 5(70), 57030-57037. doi: 10.1039/c5ra06198a

Bijanzad, K., Tadjarodi, A., & Akhavan, O. (2015). Photocatalytic activity of mesoporous microbricks of ZnO nanoparticles prepared by the thermal decomposition of bis(2-aminonicotinato) zinc (II). Cuihua Xuebao/Chinese Journal of Catalysis, 36(5), 742-749. doi: 10.1016/S1872-2067(14)60305-3

Bijanzad, K., Tadjarodi, A., Akhavan, O., & Khiavi, M. M. (2015). Solid state preparation and photocatalytic activity of bismuth oxybromide nanoplates. Research on Chemical Intermediates. doi: 10.1007/s11164-015-2159-2


Bijanzad, K., Tadjarodi, A., Moghaddasi Khiavi, M., & Akhavan, O. (2015). Microwave-assisted synthesis of bismuth oxybromochloride nanoflakes for visible light photodegradation of pollutants. Physica B: Condensed Matter, 475, 14-20. doi: 10.1016/j.physb.2015.06.013



Byranvand, M. M., Dabirian, A., Kharat, A. N., & Taghavinia, N. (2015). Photonic design of embedded dielectric scatterers for dye sensitized solar cells. RSC Advances, 5(42), 33098-33104. doi: 10.1039/c5ra04020e


Darbandi, M., & Sabouri, M. (2015). Detail study on improving micro/nano gas mixer performances in slip and transitional flow regimes. Sensors and Actuators, B: Chemical, 218, 78-88. doi: 10.1016/j.snb.2015.03.097


Dehghani, M., Behjat, A., Tajabadi, F., & Taghavinia, N. (2015). Totally solution-processed CuInS2 solar cells based on chloride inks: Reduced metastable phases and improved current density. Journal of Physics D: Applied Physics, 48(11). doi: 10.1088/0022-3727/48/11/115304

Delfani, M. R., & Shodja, H. M. (2015). An exact analysis for the hoop elasticity and pressure-induced twist of CNT-nanovessels and CNT-nanopipes. Mechanics of Materials, 82, 47-62A. doi: 10.1016/j.mechmat.2014.11.008


Ehtesabi, H., Mahdi Ahadian, M., & Taghikhani, V. (2015). Enhanced heavy oil recovery using TiO2 nanoparticles: Investigation of deposition during transport in core plug. Energy and Fuels, 29(1), 1-8. doi: 10.1021/ef5015605

Farvizi, M., Ebadzadeh, T., Vaezi, M. R., Yoon, E. Y., Kim, Y. J., Kang, J. Y., . . . Simchi, A. (2015). Effect of starting materials on the wear performance of NiTi-based composites. Wear, 334-335, 35-43. doi: 10.1016/j.wear.2015.04.011

Fathizadeh, A., Schiessel, H., & Ejtehadi, M. R. (2015). Molecular dynamics simulation of supercoiled DNA rings. Macromolecules, 48(1), 164-172. doi: 10.1021/ma501660w

Firouz-Abadi, R. D., & Badri-Kouhi, E. (2015). Thermal buckling analysis of bridged single walled carbon nanotubes using molecular structural mechanics. Journal of Applied Physics, 117(11). doi: 10.1063/1.4914906

Ghasemi, F., Hormozi-Nezhad, M. R., & Mahmoudi, M. (2015). A colorimetric sensor array for detection and discrimination of biothiols based on aggregation of gold nanoparticles. Analytica Chimica Acta, 882, 58-67. doi: 10.1016/j.aca.2015.04.011

Ghasempour, F., Azimirad, R., Amini, A., & Akhavan, O. (2015). Visible light photoinactivation of bacteria by tungsten oxide nanostructures formed on a tungsten foil. Applied Surface Science, 338, 55-60. doi: 10.1016/j.apsusc.2015.01.217

Gheiratmand, T., Madaah Hosseini, H. R., Davami, P., Gjoka, M., & Song, M. (2015). The effect of mechanical milling on the soft magnetic properties of amorphous FINEMET alloy. Journal of Magnetism and Magnetic Materials, 381, 322-327. doi:


Gorji, A. H., Simchi, A., & Kokabi, A. H. (2015). Development of composite silver/nickel nanopastes for low temperature Joining of yttria-stabilized zirconia to stainless steels. Ceramics International, 41(1), 1815-1822. doi: 10.1016/j.ceramint.2014.09.128

Hatamie, S., Akhavan, O., Sadrnezhaad, S. K., Ahadian, M. M., Shirolkar, M. M., & Wang, H. Q. (2015). Curcumin-reduced graphene oxide sheets and their effects on human breast cancer cells. Materials Science and Engineering C, 55, 482-489. doi: 10.1016/j.msec.2015.05.077

Hormozi-Nezhad, M. R., & Abbasi-Moayed, S. (2015). A Visual Colorimetric Probe for Naked-Eye Detection of Pamidronate Disodium in Human Plasma Based on Aggregation of Citrate-Capped Gold Nanoparticles. Plasmonics. doi: 10.1007/s11468-015-9888-3

Hormozi-Nezhad, M. R., & Taghipour, M. (2015). An ultrasensitive and selective turn-off fluorescent nanoprobe for the detection of copper ions. Analytical Methods, 7(12), 5067-5073. doi: 10.1039/c5ay00766f

Hosseini, Z. S., Mortezaali, A., Iraji Zad, A., & Fardindoost, S. (2015). Sensitive and selective room temperature H2S gas sensor based on Au sensitized vertical ZnO nanorods with flower-like structures. Journal of Alloys and Compounds, 628, 222-229. doi: 10.1016/j.jallcom.2014.12.163

Hosseini, Z. S., Zad, A. I., & Mortezaali, A. (2015). Room temperature H<inf>2</inf>S gas sensor based on rather aligned ZnO nanorods with flower-like structures. Sensors and Actuators, B: Chemical(PartA), 865-871. doi: 10.1016/j.snb.2014.10.085

Kamali, M. T., Shodja, H. M., & Forouzan, B. (2015). Three-dimensional free vibration of arbitrarily shaped laminated micro-plates with sliding interfaces within couple stress theory. Journal of Sound and Vibration, 339, 176-195. doi: 10.1016/j.jsv.2014.11.025

Kheirabadi, M., Bagheri, R., & Kabiri, K. (2015a). Structure, swelling and mechanical behavior of a cationic full-IPN hydrogel reinforced with modified nanoclay. Iranian Polymer Journal (English Edition), 24(5), 379-388. doi: 10.1007/s13726-015-0330-7

Kheirabadi, M., Bagheri, R., & Kabiri, K. (2015b). Swelling and mechanical behavior of nanoclay reinforced hydrogel: single network vs. full interpenetrating polymer network. Polymer Bulletin, 72(7), 1663-1681. doi: 10.1007/s00289-015-1362-z

Khodabakhshi, F., Gerlich, A. P., Simchi, A., & Kokabi, A. H. (2015). Hot deformation behavior of an aluminum-matrix hybrid nanocomposite fabricated by friction stir processing. Materials Science and Engineering A, 626, 458-466. doi: 10.1016/j.msea.2014.12.110

Khodabakhshi, F., Simchi, A., Kokabi, A. H., Gerlich, A. P., & Nosko, M. (2015). Effects of stored strain energy on restoration mechanisms and texture components in an aluminum-magnesium alloy prepared by friction stir processing. Materials Science and Engineering A, 642, 204-214. doi: 10.1016/j.msea.2015.07.001


Khodabakhshi, F., Simchi, A., Kokabi, A. H., Sadeghahmadi, M., & Gerlich, A. P. (2015). Reactive friction stir processing of AA 5052-TiO2 nanocomposite: Process-microstructure-mechanical characteristics. Materials Science and Technology (United Kingdom), 31(4), 426-435. doi: 10.1179/1743284714Y.0000000573

Khodabakhshi, F., Simchi, A., Kokabi, A. H., Švec, P., Simančík, F., & Gerlich, A. P. (2015). Effects of nanometric inclusions on the microstructural characteristics and strengthening of a friction-stir processed aluminum-magnesium alloy. Materials Science and Engineering A, 642, 215-229. doi: 10.1016/j.msea.2015.06.081


Mohammadpour, R., & Janfaza, S. (2015). Efficient Nanostructured Biophotovoltaic Cell Based on Bacteriorhodopsin as Biophotosensitizer. ACS Sustainable Chemistry and Engineering, 3(5), 809-813. doi: 10.1021/sc500617w


Moradi, S., Akhavan, O., Tayyebi, A., Rahighi, R., Mohammadzadeh, M., & Saligheh Rad, H. R. (2015). Magnetite/dextran-functionalized graphene oxide nanosheets for in vivo positive contrast magnetic resonance imaging. RSC Advances, 5(59), 47529-47537. doi: 10.1039/c5ra03331d


Naseri, N., Qorbani, M., Kim, H., Choi, W., & Moshfegh, A. Z. (2015). To what extent can surface morphology influence the photoelectrochemical performance of Au:WO3 electrodes? Journal of Physical Chemistry C, 119(3), 1271-1279. doi: 10.1021/jp507988c


Ordikhani, F., Farani, M. R., Dehghani, M., Tamjid, E., & Simchi, A. (2015). Physicochemical and biological properties of electrodeposited graphene oxide/chitosan films with drug-eluting capacity. Carbon, 84(C), 91-102. doi: 10.1016/j.carbon.2014.11.052


Pirhady Tavandashti, N., Ghorbani, M., & Shojaei, A. (2015). Morphology transition control of polyaniline from nanotubes to nanospheres in a soft template method. Polymer International, 64(1), 88-95. doi: 10.1002/pi.4758


Qorbani, M., Naseri, N., Moradlou, O., Azimirad, R., & Moshfegh, A. Z. (2015). How CdS nanoparticles can influence TiO2 nanotube arrays in solar energy applications? Applied Catalysis B: Environmental, 162, 210-216. doi: 10.1016/j.apcatb.2014.06.053


Qorbani, M., Naseri, N., & Moshfegh, A. Z. (2015). Hierarchical Co<inf>3</inf>O<inf>4</inf>/Co(OH)<inf>2</inf> nanoflakes as a supercapacitor electrode: Experimental and semi-empirical model. ACS Applied Materials and Interfaces, 7(21), 11172-11179. doi: 10.1021/acsami.5b00806


Rostami, P., Nemati, A., Malekshahi Byranvand, M., Mohammadpour, R., & Faridi, H. (2015). One-pot synthesis of ZnO nanoparticles and submicron-aggregates for dye-sensitized solar cells. Materials Letters, 139, 433-436. doi: 10.1016/j.matlet.2014.10.134


Samadi-Dooki, A., Shodja, H. M., & Malekmotiei, L. (2015). The effect of the physical properties of the substrate on the kinetics of cell adhesion and crawling studied by an axisymmetric diffusion-energy balance coupled model. Soft Matter, 11(18), 3693-3705. doi: 10.1039/c5sm00394f



Sasanpour, P., Mohammadpour, R., & Amiri, K. (2015). Neural implant stimulation based on TiO2 nanostructured arrays; A multiphysics modeling verification. Paper presented at the IECBES 2014, Conference Proceedings - 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet".



Sharifi, N., Ghazyani, N., & Taghavinia, N. (2015). Morphological dependence of light backscattering from metallic back reflector films: Application in dye-sensitized solar cells. Physica Status Solidi (A) Applications and Materials Science, 212(4), 785-790. doi: 10.1002/pssa.201431349

Shodja, H. M., Enzevaee, C., & Gutkin, M. Y. (2015). Interface effect on the formation of a dipole of screw misfit dislocations in an embedded nanowire with uniform shear eigenstrain field. European Journal of Mechanics, A/Solids, 51, 154-159. doi: 10.1016/j.euromechsol.2014.12.006



Shodja, H. M., Eskandari, S., & Eskandari, M. (2015). Shear horizontal surface acoustic waves in functionally graded magneto-electro-elastic half-space. Journal of Engineering Mathematics. doi: 10.1007/s10665-015-9798-6


Shogh, S., Mohammadpour, R., Iraji Zad, A., & Taghavinia, N. (2015). Nitrogen-doped submicron-size TiO2 particles as bifunctional light scatterers in dye-sensitized solar cells. Applied Physics A: Materials Science and Processing. doi: 10.1007/s00339-015-9094-3


Shogh, S., Mohammadpour, R., Zad, A. I., & Taghavinia, N. (2015). Improved photovoltaic performance of nanostructured solar cells by neodymium-doped TiO<inf>2</inf> photoelectrode. Materials Letters, 159, 273-275. doi: 10.1016/j.matlet.2015.07.011



Tabatabaei, M., Shodja, H. M., & Esfarjani, K. (2015). Gap tuning and effective electron correlation energy in amorphous silicon: A first principles density functional theory-based molecular dynamics study. Computational Materials Science, 102, 110-118. doi:



Tavakoli, M. M., Simchi, A., & Aashuri, H. (2015). Supercritical synthesis and in situ deposition of PbS nanocrystals with oleic acid passivation for quantum dot solar cells. Materials Chemistry and Physics, 156, 163-169. doi: 10.1016/j.matchemphys.2015.02.043



Tavakoli, M. M., Tayyebi, A., Simchi, A., Aashuri, H., Outokesh, M., & Fan, Z. (2015). Physicochemical properties of hybrid graphene–lead sulfide quantum dots prepared by supercritical ethanol. Journal of Nanoparticle Research, 17(1). doi: 10.1007/s11051-014-2854-8


Tohidian, M., Ghaffarian, S. R., Nouri, M., Jaafarnia, E., & Haghighi, A. H. (2015). Polyelectrolyte nanocomposite membranes using imidazole-functionalized nanosilica for fuel cell applications. Journal of Macromolecular Science, Part B: Physics, 54(1), 17-31. doi: 10.1080/00222348.2014.982485


Vasei, M., Tajabadi, F., Jabbari, A., & Taghavinia, N. (2015). Stable dye-sensitized solar cells based on a gel electrolyte with ethyl cellulose as the gelator. Applied Physics A: Materials Science and Processing. doi: 10.1007/s00339-015-9332-8


Zare, H., Marandi, M., Fardindoost, S., Sharma, V. K., Yeltik, A., Akhavan, O., . . . Taghavinia, N. (2015). High-efficiency CdTe/CdS core/shell nanocrystals in water enabled by photo-induced colloidal hetero-epitaxy of CdS shelling at room temperature. Nano Research. doi: 10.1007/s12274-015-0742-x



Zarrabi, A., & Vossoughi, M. (2015). Paclitaxel/β-CD-g-PG inclusion complex: An insight into complexation thermodynamics and guest solubility. Journal of Molecular Liquids, 208, 145-150. doi: 10.1016/j.molliq.2015.04.019


Zirak, M., Zhao, M., Moradlou, O., Samadi, M., Sarikhani, N., Wang, Q., . . . Moshfegh, A. Z. (2015). Controlled engineering of WS<inf>2</inf> nanosheets-CdS nanoparticle heterojunction with enhanced photoelectrochemical activity. Solar Energy Materials and Solar Cells, 141, 260-269. doi: 10.1016/j.solmat.2015.05.051

تماس با ما

شماره تلفن های پژوهشکده:

دفتر: 66164123

فکس: 66164119

معاونت: 66164120

دفتر هیآت علمی: 66164124 

دفتر پژوهشگران پسادکتری: 66164124

دبیرخانه کنفرانس نانوساختارها: 66164118

سایت، دفتر دانشجویان دکتری

و آزمایشگاه نانو محاسباتی: 66164121

مجموعه آزمایشگاه های پژوهشکده: 66164125